Influence of elevated temperatures on the cyclic deformation behaviour of the magnesium die-cast alloys AZ91D and MRI 230D

The magnesium alloys AZ91D and MRI 230D were investigated in form of die-cast specimens with a cast skin. The fine-grained microstructure consists of a dendritic magnesium solid solution and interdentritic precipitates. The cyclic deformation behaviour was characterised in stress-controlled load increase tests and constant amplitude tests by means of mechanical stress–strain hysteresis measurements at room temperature and at T = 150 °C. The MRI alloy leads to higher plastic strain amplitudes and nevertheless higher lifetimes for both temperatures. Load increase tests allow a reliable short-time estimation of the endurance limit under both, room and elevated temperatures. With the physically based fatigue life calculation method “PHYBAL” the lifetime of the magnesium alloys can be calculated on the basis of cyclic deformation data determined in one load increase test and two constant amplitude tests in excellent agreement with the conventionally determined S–N curve.