کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1583025 | 1514882 | 2008 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of extrusion on the microstructure and mechanical properties of Mg-Zn-Gd alloy reinforced with quasicrystalline particles
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The microstructure and mechanical properties of Mg95.9Zn3.5Gd0.6 alloy reinforced with icosahedral quasi-crystalline particles (I-phase) were investigated after extrusion at 573Â K and 673Â K. The effects of extrusion temperature and heat treatment on the microstructure and mechanical properties of the alloy were analyzed and the strengthening effect of I-phase was discussed. The results show that the I-phase is significantly refined upon extrusion. At room temperature, the alloy extruded at 573Â K exhibits better tensile mechanical properties as compared to the alloy extruded at 673Â K. At 473Â K, the as-extruded alloy exhibits high elongation of about 94% due to the high cohesion of the I-phase with the matrix. As compared to the alloy extruded at 573Â K, the alloy extruded at 673Â K exhibits higher precipitate strengthening effect due to a higher density of I-phase precipitates, which results in not only a high ultimate tensile strength of 117Â MPa, but also a high elongation of 82.5% at 473Â K.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 474, Issues 1â2, 15 February 2008, Pages 348-354
Journal: Materials Science and Engineering: A - Volume 474, Issues 1â2, 15 February 2008, Pages 348-354
نویسندگان
Guangyin Yuan, Yong Liu, Wenjiang Ding, Chen Lu,