Modelling the liquid-phase adsorption in packed beds at low Reynolds numbers: An improved hydrodynamic model

A hydrodynamic model including only one parameter (λO)(λO) for the prediction of both axial dispersion and external mass transfer in fixed-bed adsorbers at low Reynolds numbers (creeping flow regime) has been developed. The theoretical analysis is based on the application of the (two-dimensional) uniform dispersion model originally proposed by Bischoff and Levenspiel [1962a. Fluid dispersion—generalization and comparison of mathematical models—I. Generalization of models. Chemical Engineering Science 17, 245–255] to the representative capillary of a tube bundle model for describing the flow and mixing behaviour in packed beds. The combination of this model with the relationship between longitudinal and radial dispersion leads to the definition of the sole hydrodynamic parameter λOλO (one-parameter hydrodynamic model). Furthermore, the detailed investigation reveals that the one-parameter concept may be utilized for the application of the (one-dimensional) axial dispersed plug flow model as well. The functional dependence of the parameter λOλO on the flow conditions is elaborated from axial dispersion measurements. Both the new (one-parameter) hydrodynamic model and the classical model including axial dispersion and external mass transfer coefficients (two-parameter model) are utilized to simulate the breakthrough curves for the adsorption of naphthalene onto silica gel. This simulation study reveals that only the one-parameter hydrodynamic model is able to predict the adsorber dynamics over a large range of flow rates.