کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1583385 | 1514892 | 2007 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modeling the heterogeneous microstructures of Ti-base metal-matrix composites in the consolidation processes
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Densification in metal-matrix composites occurs by several mechanisms including plastic flow, diffusion, and power-law creep in the consolidation process. In addition, microstructural changes proceed inevitably by either recrystallization or grain growth due to the phase transformation under high temperature environment and stress concentration particularly around the fibers. Heterogeneous microstructures prior to and following consolidation have been analyzed, and the relations to densification behavior investigated. Increasing temperature or pressure leads to increasing densification rate but the non-uniform fiber distribution that is related to the heterogeneous microstructural evolution should be considered for an adequate modeling of microstructures. A material model coupled with the mechanisms-based heterogeneous microstructural evolution is then presented for consolidation. The model has been implemented into finite element software so that process simulation can be carried out, enabling the deformation behavior together with the level of densification to be compared with experimental data. Good comparisons are achieved.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 462, Issues 1â2, 25 July 2007, Pages 164-168
Journal: Materials Science and Engineering: A - Volume 462, Issues 1â2, 25 July 2007, Pages 164-168
نویسندگان
T.-W. Kim,