کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1583511 | 1514889 | 2007 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of in situ formed TiB2 particles on the abrasive wear behaviour of Al-4Cu alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The abrasive wear resistance of in situ Al-4Cu/TiB2 composites has been compared with that of the matrix Al-4Cu alloy. The influence of wt.% of TiB2 particles, applied load and abrasive particle size has been studied. The test results indicate that the abrasive wear resistance of Al-4Cu alloy is significantly improved with TiB2 particles. Abrasive wear rate is inversely proportional to hardness of the in situ composites. Although the reinforcement particles (<2 μm) are smaller than the abrasive particle size (30 and 90 μm), the TiB2 reinforcement effectively improves the abrasive wear resistance of the matrix Al-4Cu alloy. The wear rate of Al-4Cu alloy and composites increases with increase in applied load and abrasive particle size.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 465, Issues 1â2, 15 September 2007, Pages 160-164
Journal: Materials Science and Engineering: A - Volume 465, Issues 1â2, 15 September 2007, Pages 160-164
نویسندگان
S. Kumar, V. Subramanya Sarma, B.S. Murty,