کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1584207 | 1514896 | 2007 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Study on polycarbonate/multi-walled carbon nanotubes composite produced by melt processing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Multi-walled carbon nanotubes (MWCNTs) were filled into polycarbonate (PC) by large scale extruder, and some studies were carried out on as-produced composite. The results showed PC composite containing 1 wt.% of MWCNTs had a tensile strength 4.5% higher than neat PC, and the elastic modulus of PC/MWCNTs composite increased obviously with MWCNTs loadings. The electrical resistivity measurements indicated a percolation of MWCNTs near 5 wt.% (3.4 vol.%) for the composite. Either the decrease in the fluidity of the composite melts with the increase of carbon nanotubes (CNTs) loadings or the unexpected shortening of CNTs in extrusion was supposed to have weakened the effects of CNTs as a reinforcing agent or a conductive filler.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 457, Issues 1–2, 25 May 2007, Pages 287–291
Journal: Materials Science and Engineering: A - Volume 457, Issues 1–2, 25 May 2007, Pages 287–291
نویسندگان
Li Chen, Xiu-Jiang Pang, Zuo-Long Yu,