کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1584243 | 1514898 | 2007 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Investigations on the continuous drive friction welding of sintered powder metallurgical (P/M) steel and wrought copper parts
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The present investigation attempts to understand the friction welding characteristics of sintered P/M steel preforms–wrought copper dissimilar parts. In order to achieve sound weld between these two materials the process parameters were optimized and inferred that the preforms of lower densities with lower process parameters yields quality weldments, established through post-weld tests. This study also envisages the influence of process parameters which include resident preform densities, friction pressure, upset pressure, and burn-off length on microstructure and mechanical properties of the welds. This work consolidates information on the aspects of joining P/M component with wrought materials for practical execution.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volumes 454–455, 25 April 2007, Pages 114–123
Journal: Materials Science and Engineering: A - Volumes 454–455, 25 April 2007, Pages 114–123
نویسندگان
K. Jayabharath, M. Ashfaq, P. Venugopal, D.R.G. Achar,