کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1585144 | 1514909 | 2006 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Nanocrystalline structure formation in carbon steel introduced by high speed drilling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Nanocrystalline structure formation in carbon steel introduced by high speed drilling Nanocrystalline structure formation in carbon steel introduced by high speed drilling](/preview/png/1585144.png)
چکیده انگلیسی
The microstructure of drilled hole surface on an Fe–0.56% C steel (as-quenched martensite structure) has been investigated. A several microns thick nanocrystalline structure layer with an average grain size of the order of 10 nm was observed on the topmost surface of holes drilled at high speed. The existence of retained austenite on the hole surface suggests the occurrence of dynamic phase transformation (DPT) from bcc to fcc during high speed drilling. It is proposed that the nanocrystalline structure layer on the drilled hole surface is produced by a large strain gradient together with severe plastic deformation (SPD) induced DPT.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volumes 435–436, 5 November 2006, Pages 383–388
Journal: Materials Science and Engineering: A - Volumes 435–436, 5 November 2006, Pages 383–388
نویسندگان
J.G. Li, M. Umemoto, Y. Todaka, K. Tsuchiya,