کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1585337 | 1514914 | 2006 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Microstructure characterization in cryomilled Al 5083 Microstructure characterization in cryomilled Al 5083](/preview/png/1585337.png)
Nanocrystalline metals and alloys processed by severe plastic deformation (SPD) generally have improved mechanical strength compared with conventionally processed materials. In this work, we survey the microstructure of an Al 5083 alloy prepared by ball-milling powders at cryogenic temperatures (cryomilling) then consolidated by hot-isostatic pressing (HIPing) and extrusion into cylindrical billets. After milling, the particles are comprised of nanocrystalline grains, which are maintained following extrusion. We identify MgO, Al6(FeMnCr), Al(MnFe)Si, AlCrMg, Mg2Si, and SiO2 phases as precipitates or dispersoids in the microstructure. This synthesis method results in a yield strength that is approximately twice that of typical wrought Al 5083 alloys. We find that the microhardness is essentially unchanged after annealing at temperatures up to ∼0.8Tm. The influence of the components of the microstructure on the measured mechanical properties is discussed.
Journal: Materials Science and Engineering: A - Volume 430, Issues 1–2, 25 August 2006, Pages 230–241