Effect of hydroxyapatite content on the microstructure, thermal and mechanical properties of Ti-based glassy alloy/hydroxyapatite composite prepared by spark plasma sintering

In the present paper, the effects of hydroxyapatite (HA) content on the microstructure, thermal and mechanical properties of Ti-based glassy alloy/HA composite prepared by spark plasma sintering (SPS) are investigated. The microstructure of the composites is homogeneous when the HA is lower than 2 wt%. When the HA content is higher than 3 wt%, the crystalline precipitates with size of less than 5 nm are distributed in the glassy matrix. HA decomposes during sintering procedure for the composite with high HA content. With increasing HA addition, compressive strength decreases. Especially for the HA content is over 2 wt%, the strength decreases sharply because of partial crystallization of glassy alloy matrix.

Figure optionsDownload as PowerPoint slideResearch highlights
► Ti-based glassy alloy/HA composites are prepared by SPS.
► The effect of HA on microstructure and properties of the composite is investigated.
► The composites are homogeneous when the HA is lower than 2 wt%.
► HA decomposes during SPS process for the higher HA content.
► With increasing HA content, compressive strength decreases.