کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1600989 1005182 2010 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Preparation, microstructure and tribological properties of Ni3Al intermetallic compound coating by laser cladding
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
Preparation, microstructure and tribological properties of Ni3Al intermetallic compound coating by laser cladding
چکیده انگلیسی
Single Ni3Al intermetallic compound phase coating was successfully in-situ synthesized by laser cladding with preplaced Ni and Al mixed powders. The phase composition and microstructure of the Ni3Al coating were studied by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The effects of laser cladding parameters on the microstructure and tribological properties of the Ni3Al coating were investigated. It was found that the laser power density and energy density had a crucial influence on the microstructure and tribological properties of the Ni3Al coatings. The Ni3Al coating synthesized under the lower power density and energy density had a dense and fine microstructure as well as some excellent properties such as higher and homogeneous distribution microhardness, lower friction coefficient and wear rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 18, Issue 5, May 2010, Pages 871-876
نویسندگان
, , , , , ,