کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1601021 | 1005182 | 2010 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Plastic deformation behavior of Mg89Zn4Y7 extruded alloy composed of long-period stacking ordered phase
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Plastic deformation behavior of Mg89Zn4Y7 extruded alloy composed of long-period stacking ordered phase Plastic deformation behavior of Mg89Zn4Y7 extruded alloy composed of long-period stacking ordered phase](/preview/png/1601021.png)
چکیده انگلیسی
The deformation behavior of an Mg89Zn4Y7 (at.%) extruded alloy composed mostly of the long-period stacking ordered (LPSO) phases, was investigated at room temperature. Several heat-treatments were conducted for the extruded alloy in the temperature range between 400 and 525 °C, and the correlation between the microstructure and the mechanical properties were quantitatively examined. The yield stress of the as-extruded alloy showed extremely high value of â¼480 MPa. The deformation of the as-extruded alloy proceeded accompanied by the formation of deformation kinks and small amounts of non-basal slips. The microstructure of the extruded alloy was highly thermally stable and the yield stress showed little change by heat-treatments below 400 °C. However, the yield stress was gradually decreased by annealing above 400 °C. The yield stress of the alloys annealed at and above 475 °C showed discontinuous decreases with increasing annealing temperature. The yield stress of the annealed specimens could be estimated by the Hall-Petch relationship by regarding the length of the long-axis of plate-like grains as the grain size. This suggests that the basal (0001) slip governed the plastic behavior of the LPSO-phase alloy composed of randomly oriented grains.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 18, Issue 5, May 2010, Pages 1079-1085
Journal: Intermetallics - Volume 18, Issue 5, May 2010, Pages 1079-1085
نویسندگان
K. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda, Y. Umakoshi,