کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1601807 | 1515893 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical behavior of NiAl-based alloy prepared by powder metallurgical route
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Rapidly solidified NiAl-28Cr-6Mo-B-Dy prealloyed powder doped with Nb powder was consolidated by hot pressing under 1250 °C for 30 min at 30 MPa. The consolidated material exhibited a different microstructure from the original powder, i.e. the NiAl and Cr(Mo) plates in the eutectic cell tend to break down into short platelets or even particles during hot pressing process. The mechanical behaviors at room temperature and at high temperature of consolidated sample from powder alloy were evaluated by three-point bending technique, tensile test and compressive test. The results showed that the hot pressing alloy possessed a reasonable combination of room temperature ductility and toughness, and elevated temperature strength.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 15, Issues 5â6, MayâJune 2007, Pages 749-752
Journal: Intermetallics - Volume 15, Issues 5â6, MayâJune 2007, Pages 749-752
نویسندگان
K.W. Huai, J.T. Guo, Q. Gao, H.T. Li, R. Yang,