کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1602073 | 1515894 | 2006 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Synthesis of bulk FeAl nanostructured materials by HVOF spray forming and Spark Plasma Sintering
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Synthesis of bulk FeAl nanostructured materials by HVOF spray forming and Spark Plasma Sintering Synthesis of bulk FeAl nanostructured materials by HVOF spray forming and Spark Plasma Sintering](/preview/png/1602073.png)
چکیده انگلیسی
This paper examines the efficiency of two consolidation processing techniques: High Velocity Oxy-Fuel (HVOF) spray forming and Spark Plasma Sintering (SPS) to obtain bulk nanostructured materials from an Y2O3 reinforced Fe-40Al (at.%) milled powder. The microstructures of the sintered end-products were characterized by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) in order to gain new insights in their microstructure formation mechanisms. HVOF spray forming is more effective to retain fine nanograins, in particular within retained unmelted powder particles. The drawbacks of this technique are that it inevitably leads to a high fraction of porosity and, because of lack of wetting, large areas (the melted zones) without any Y2O3 oxide. Comparatively, SPS has a much higher potential to create sub-micrometer microstructures within which the oxides are more homogeneously distributed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 14, Issues 10â11, OctoberâNovember 2006, Pages 1208-1213
Journal: Intermetallics - Volume 14, Issues 10â11, OctoberâNovember 2006, Pages 1208-1213
نویسندگان
Thierry Grosdidier, Gang Ji, Frédéric Bernard, Eric Gaffet, Zuhair A. Munir, Sébastien Launois,