کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1602811 1515962 2016 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of surface topography on early stages on steel galling of coated WC-Co hard metals
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
Influence of surface topography on early stages on steel galling of coated WC-Co hard metals
چکیده انگلیسی
Galling, i.e. the transfer of workpiece material to tool surfaces, is an important factor known to influence both wear behaviour and loading conditions of metalworking tools such as deep-drawing, blanking or fine blanking punches or dies. The current study investigates very early stages of galling of mild steel on WC-Co hard metals coated by AlCrN-based hard coatings. Repeated dry-sliding contacts with virgin steel material were physically simulated by a ball-on-disc test setup with a virgin contact area on the ball in each lap. Special attention was paid to the influence of coating surface topography produced by coating post-treatment and the resulting distinct differences in galling behaviour. Galling initiation is illustrated by cross-sections of micrometre-sized features of transferred steel, showing their nucleation sites to be microscopic surface asperities. A layer-by-layer material transfer mechanism is indicated by the galling features' internal layered structure. The current work demonstrates a clear connection between the ratio of peaks to valleys on coating surfaces and the kinetics of the early stages of galling. A reduction of this ratio, e.g. by coating post-treatment via blasting with diamond-containing elastomer particles, leads to a reduced tendency for steel transfer to coated WC-Co hard metal surfaces.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Refractory Metals and Hard Materials - Volume 57, June 2016, Pages 24-30
نویسندگان
, , , , , ,