Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: Microstructure and fracture toughness

This work describes the microstructure and fracture toughness of zirconia toughened alumina (ZTA) nanocomposite in which multi-wall carbon nanotubes (MWCNTs) and nanosized ZrO2 particles were used as reinforcement. The ZTA nanocomposites with additions of 0, 0.005, and 0.01 wt.% MWCNTs and 2 wt.% nanosized ZrO2 particles were pressureless sintered in an anti-oxidant sagger with graphite powder bed at 1520 °C during 1 h in air and then HIPed at 1475 °C in argon atmosphere 1 h at a pressure of 150 MPa. Relative densities ranging 94–98% were reached. In HIPed composites the hardness and fracture toughness values were increased up to ∼17% and ∼37%, respectively, compared to the “as sintered” composites free of carbon nanotubes. A combined fracture mode, crack deflection, pull-outs of a small amount of carbon nanotubes, and bridging effect were the mechanisms leading to the improvement in fracture toughness.