کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1604391 | 1516007 | 2009 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Core drilling in reinforced concrete using polycrystalline diamond (PCD) cutters: Wear and fracture mechanisms
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The wear and fracture mechanisms of PCD cutters active during the core drilling of reinforced concrete have been documented. All have analogies with well known mechanisms from rotary and rotary-percussive rock drilling and also metal cutting (machining). At rotational velocities up to 5Â m/s and normal and cutting forces around 2000Â N per 5Â mm cutter (equating to principal stresses of around 500Â N/mm2 at the cutting edge), gross fracturing of relatively un-worn cutters early in drilling is the predominant failure mechanism. Chipping at various size scales is observed with approximately the same rate of occurrence as cutter wear, which is mainly caused by attrition abrasion in concrete and to a lesser extent by chemical (diffusive) wear in the reinforcement steel. Chipping occurs by brittle fracture (unstable crack growth) at the small- to mid-scale and by fatigue crack growth at the large scale.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Refractory Metals and Hard Materials - Volume 27, Issue 2, March 2009, Pages 394-402
Journal: International Journal of Refractory Metals and Hard Materials - Volume 27, Issue 2, March 2009, Pages 394-402
نویسندگان
S.G. Moseley, K.-P. Bohn, M. Goedickemeier,