Hydrogen generation in a Pd membrane fuel processor: Productivity effects during methanol steam reforming

Performance analyses are carried out for the palladium membrane fuel processor for catalytic generation of high purity hydrogen. The reactor model includes detailed particle-scale multi-component diffusion, multiple reversible reactions, flow, and membrane transport. Using methanol steam reforming on Cu/ZnO/Al2O3Cu/ZnO/Al2O3 catalyst as the test reaction, a systematic examination of the effects of operating and reactor design parameters on key performance metrics is presented. Single particle simulations reveal a complex interplay between nonisobaric transport and the reversible reactions (methanol reforming and decomposition, and water–gas shift), which impact overall reactor performance. An analysis of characteristic times helps to identify four different productivity controlling regimes: (i) permeation control, encountered with thick membranes and/or insufficient membrane area; (ii) catalyst pore diffusion control encountered with diffusion of reacting species in larger particles; (iii) reaction control, encountered when intrinsic catalytic rates are too low because of inadequate activity or catalyst loading; and (iv) feed control, encountered when the limiting reactant feed rate is inadequate. The simulations reveal that a maximum in the hydrogen productivity occurs at an intermediate space velocity, while the hydrogen utilization is a decreasing function of space velocity, implying a trade-off between productivity and hydrogen utilization. The locus of productivity maxima itself exhibits a maximum at an intermediate membrane surface to volume ratio, the specific value of which is dependent on the particle size, membrane thickness and reaction conditions. At moderate temperature and total pressure (260∘C, 10 bar), particles smaller than 2 mm diameter, Pd membranes with thickness less than 10μm, and membrane surface to volume ratio exceeding 500m2/m3 are needed to achieve viable productivity (>50molH2/m3s). A comparison between the packed-bed membrane reactor and conventional packed-bed reactor indicates a modest improvement in the conversion and productivity due to in situ hydrogen removal.