کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1630454 | 1516668 | 2008 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication and compressive performance of plain carbon steel honeycomb sandwich panels
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Plain carbon steel Q215 honeycomb sandwich panels were manufactured by brazing in a vacuum furnace. Their characteristic parameters, including equivalent density, equivalent elastic modulus, and equivalent compressive strength along out-of-plane (z-direction) and in-plane (x- and y-directions), were derived theoretically and then determined experimentally by an 810 material test system. On the basis of the experimental data, the compressive stress-strain curves were given. The results indicate that the measurements of equivalent Young's modulus and initial compressive strength are in good agreement with calculations, and that the maximum compressive strain near to solid can be up to 0.5-0.6 along out-of-plane, 0.6-0.7 along in-plane. The strength-to-density ratio of plain carbon steel honeycomb panels is near to those of Al alloy hexagonal-honeycomb and 304L stainless steel square-honeycomb, but the compressive peak strength is greater than that of Al alloy hexagonal-honeycomb.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material - Volume 15, Issue 3, June 2008, Pages 255-260
Journal: Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material - Volume 15, Issue 3, June 2008, Pages 255-260
نویسندگان
Yu'an Jing, Shiju Guo, Jingtao Han, Yufei Zhang, Weijuan Li,