Comparative study of β-Si3N4 powders prepared by SHS sintered by spark plasma sintering and hot pressing

β-Si3N4 powders prepared by self-propagating high-temperature synthesis (SHS) with additions of Y2O3 and Al2O3 were sintered by spark plasma sintering (SPS). The densification, microstructure, and mechanical properties of Si3N4 ceramics prepared using this method were compared with those obtained by hot pressing process. Well densified Si3N4 ceramics with finer and homogeneous microstructure and better mechanical properties were obtained in the case of the SPS technique at 200°C lower than that of hot pressing. The microhardness is 15.72 GPa, the bending strength is 716.46 MPa, and the fracture toughness is 7.03 MPa·m½.