Micromagnetic simulation of FeCo write head in perpendicular recording hard disk drives

The single-pole tip (SPT) heads made of the high saturation FeCo ferromagnetic metals are crucial for the actualization of ultrahigh density perpendicular recording. The effective head field distribution in the medium is of key importance for the design of the SPT head, which would be analyzed by micromagnetic simulations in this work. Two 3D micromagnetic models of the SPT head were established to select a more appropriate method of modeling, with a magnetostatic image effect or a real soft magnetic material to model the image of the SPT head in soft under layer (SUL). The results from these two designs were tested and compared to the ideal head field calculated by the Jacobi finite element method (FEM); and the design with the real soft magnetic material as image was proved suitable for simulating the ultrahigh density perpendicular recording write head.