کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1636206 1516955 2015 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of ball milling on microstructural evolution during partial remelting of 6061 aluminum alloy prepared by cold-pressing of alloy powders
ترجمه فارسی عنوان
اثر آسیاب توپ بر تکامل میکرو سازنده در طی بازسازی جزئی 6061 آلیاژ آلومینیوم تهیه شده توسط پرس سرد با استفاده از پودرهای آلی
ترجمه چکیده
اثر آسیاب توپ بر تکامل میکرو سازنده در طی بازسازی جزئی 6061 آلیاژ آلومینیوم تهیه شده توسط پرس سرد با استفاده از پودر آلیاژی خالص مورد بررسی قرار گرفت. نتایج نشان می دهد که تکامل میکرو سازه 6061 آلیاژ آلومینیوم را می توان به سه مرحله تقسیم کرد: انحلال فازهای تخریب شده و رفتار خرد شدن و رشد دانه های حاصل شده، جداسازی ساختاری و اسپروئید سازی ذرات اولیه و رفتار خمشی نهایی ذرات . در مقایسه با آلیاژ بدون آسیاب توپ، آسیاب توپ، مرحله اول تکامل میکرو سازگار را به دلیل انرژی ذخیره شده در پودر تسریع می کند، اما دو مرحله دوم به علت شکل گیری پودر های بزرگ به سرعت کاهش می یابد. علاوه بر این، میکروارگانیسم سرد تر فشرده تر، کوچکتر و کروی است، ذرات اولیه در میکروسیستم نهایی نیمه جامد. علاوه بر این، به درستی بالا بردن دمای حرارت برای به دست آوردن ذرات کوچک و اسفنجی مفید است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
چکیده انگلیسی
The effect of ball milling on the microstructural evolution was investigated during partial remelting of 6061 aluminum alloy prepared by cold-pressing of atomized alloy powders. The results indicate that the microstructural evolution of 6061 aluminum alloy can be divided into three stages, the dissolution of eutectic phases and the coarsening and growth behavior of the resulting grains, structural separation and spheroidization of primary particles, and the final coarsening behavior of the particles. Compared with the alloy without ball milling, ball milling accelerates the first stage of microstructural evolution due to the energy stored in the powders, but the latter two stages are slowed down because of the formation of large-sized powders. Moreover, the finer the as-cold-pressed microstructure is, the smaller and more spherical the primary particles in the final semisolid microstructure are. Furthermore, properly elevating the heating temperature is beneficial for obtaining small and spheroidal particles.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 25, Issue 7, July 2015, Pages 2113-2121
نویسندگان
, , , ,