کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1638136 | 1516984 | 2013 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of AZ61 magnesium alloy parts achieved by thixo-extruding semisolid billets prepared by new SIMA
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
New strain induced melt activation (new SIMA) method was employed to prepare high-quality semisolid billet of AZ61 magnesium alloy. Optical microscopy and tensile test were used to study the microstructure and mechanical properties of the thixo-extruded component. The results showed that the optimal process parameters for achieving the complete filling status involved the applied pressure of 784 MPa, the pressure holding time of 90 s and the die temperature of 450 °C. Compared to semisolid isothermal treatment, high mechanical properties such as the tensile strength of 300.5 MPa and elongation of 22% and fine microstructure were obtained in the thixo-extruded parts. With increasing the isothermal temperature and holding time, the tensile strength and elongation were increased firstly and then decreased. When the press pass was increased from 1 to 4, the tensile strength and elongation of the thixo-extruded parts were greatly enhanced and microstructure was refined obviously.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 23, Issue 3, March 2013, Pages 576-585
Journal: Transactions of Nonferrous Metals Society of China - Volume 23, Issue 3, March 2013, Pages 576-585
نویسندگان
Ju-fu JIANG, Ying WANG, Jun LIU, Jian-jun QU, Zhi-ming DU, Shou-jing LUO,