Plastic anisotropy and fracture behavior of AZ31 magnesium alloy

The effects of texture and abnormal large grains on the plastic anisotropy and fracture behavior of hot-rolled AZ31 magnesium alloy were investigated. Uniaxial tensile deformation behaviors of samples with tensile axis tilting 0°, 15°, 30°, 45°, 60°, 75° and 90° to normal direction (ND) respectively were addressed. Tensile deformation anisotropy was observed for samples with different angles to ND. The results show that the specimens with the angle from 0° to 30° exhibit relatively lower yielding strength due to the extension twinning. However, basal slip and prismatic slip are the dominant deformation modes for the specimens with angles larger than 45°. Macro-fractures are parallel to the length direction of abnormal large grains in the specimens with angles less than 60°, while those are serrated fracture edge for specimens with angles 75° and 90°.