کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1638461 1516996 2012 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of spark plasma sintering temperature on microstructure and mechanical properties of melt-spun TiAl alloys
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
Effect of spark plasma sintering temperature on microstructure and mechanical properties of melt-spun TiAl alloys
چکیده انگلیسی

A TiAl alloy from pulverized rapidly solidified ribbons with the composition of Ti-46Al-2Cr-4Nb-0.3Y (mole fraction, %) was processed by spark plasma sintering (SPS). The effects of sintering temperature on the microstructure and mechanical properties were studied. The results show that the microstructure and phase constitution vary with sintering temperature. Sintering the milled powders at 1200 °C produces fully dense compact. Higher sintering temperature does not improve the densification evidently. The dominant phases are γ and α2 in the bulk alloys sintered at 1200 °C. With higher sintering temperature, the fraction of α2 phase decreases and the microstructure changes from equiaxed near γ grain to near lamellar structure, together with a slight coarsening. The bulk alloy sintered at 1260 °C with refined and homogeneous near lamellar structure reveals the best overall mechanical properties. The compressional fracture stress and compression ratio are 2984 MPa and 41.5%, respectively, at room temperature. The tensile fracture stress and ductility are 527.5 MPa and 5.9%, respectively, at 800 °C.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 22, Issue 3, March 2012, Pages 528-533