Synthesis and properties of nanocrystalline nonferrous metals prepared by flow-levitation-molding method

Nanocrystalline nonferrous metals (Cu, Al, and Ag) were synthesized by flow-levitation-molding method. The microstructure of the as-prepared nanocrystalline metals was characterized by XRD and FESEM. The microhardness and electrical resistivity were tested by the HMV-2 type Microhardness Tester and 6157 type Electrometer, respectively. The synthesis process was also studied. The results show that the spheriform particles in nanocrystalline metals have average grain size of 20–30 nm. The relative density of nanocrystalline Cu, Al, and Ag are 95.1%, 98.1% and 98.3%, respectively. The microhardness of nanocrystalline Cu, Al and Ag are 2.01, 2.11 and 1.26 GPa respectively, which are larger than those of their coarse-grained counterparts by the factor of 4.5, 14, and 2.5, respectively. The electrical resistivity of nanocrystalline Cu at room temperature is 1.5 × 10−7 Ωm, which is higher than coarse-grained Cu by a factor of 7.5. The pressure is the predominant factor influencing the density of the as-prepared nanocrystalline nonferrous metals.