کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1679367 | 1010260 | 2014 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fundamentals of the incremental tube forming process
ترجمه فارسی عنوان
مبانی فرایند تشکیل لوله های افزایشی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تشکیل فلز خم شدن لوله
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
The manufacture of bent tubes made of high-strength materials requires high bending loads, which lead to large springback and eventually distortion of the cross-section. The incremental tube forming process allows significant reduction of the bending moment. This is achieved by combining the continuous bending process with an incremental tube spinning process. The paper describes an analytical model to predict the bending moment reduction as a function of the superposed spinning process parameters. Experimental results are provided to validate the theoretical results. This model allows the design and optimization of the incremental tube forming process with low springback.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Manufacturing Technology - Volume 63, Issue 1, 2014, Pages 253–256
Journal: CIRP Annals - Manufacturing Technology - Volume 63, Issue 1, 2014, Pages 253–256
نویسندگان
Christoph Becker, A. Erman Tekkaya, Matthias Kleiner,