کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1679649 | 1010325 | 2006 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Development of Ultrasonic Vibration Assisted Polishing Machine for Micro Aspheric Die and Mold
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Development of Ultrasonic Vibration Assisted Polishing Machine for Micro Aspheric Die and Mold Development of Ultrasonic Vibration Assisted Polishing Machine for Micro Aspheric Die and Mold](/preview/png/1679649.png)
چکیده انگلیسی
Demands are increasing for micro axis-symmetric aspherical lenses to be installed in various optical devices. The micro glass lenses are generally molded by glass press process with micro aspheric ceramic molding dies or molds made of tungsten carbide or silicon carbide. These dies and molds are mostly ground with micro diamond wheels, but require additional finishing process as the size of the dies and molds become smaller and the required accuracy becomes higher. In order to finish micro aspheric dies and molds with diameter less than 3mm, an ultrasonic vibration assisted polishing machine is developed. A small polishing tool is mounted on a 3-axis controlled table, and vibrated at an ultrasonic frequency with piezo-electric actuators. The polishing pressure can be controlled with a resolution of 2 mN. Some micro aspheric molding dies made of binder-less tungsten carbide were polished, and the form accuracy below 70 nmP-V and surface roughness of 7 nmRy were obtained with the developed machine.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 55, Issue 1, 2006, Pages 385-388
Journal: CIRP Annals - Volume 55, Issue 1, 2006, Pages 385-388
نویسندگان
H. Suzuki, T. Moriwaki, T. Okino, Y. Ando,