کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1679969 | 1518454 | 2008 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Application of AE and cutting force signals in tool condition monitoring in micro-milling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The paper presents acoustic emission and cutting force signals application in tool condition monitoring in micro-milling of cold-work tool steel. The results obtained revealed strong influence of tool wear on acoustic emission signal, providing acceptable results even while used separately. The signal was easy to register, and showed a very short reaction time to the tool–workpiece contact. As excitation frequency, equal to edge passing frequency, was much higher than in conventional milling, cutting forces, usually the best for this purpose, were strongly disturbed by resonance vibration of the table dynamometer. Despite these disturbances, the signals still show dependence on tool wear, making them useful for tool condition monitoring.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Journal of Manufacturing Science and Technology - Volume 1, Issue 2, 2008, Pages 97–102
Journal: CIRP Journal of Manufacturing Science and Technology - Volume 1, Issue 2, 2008, Pages 97–102
نویسندگان
K. Jemielniak, P.J. Arrazola,