Preparation of a new micro-porous poly(methyl methacrylate)-grafted polyethylene separator for high performance Li secondary battery

In this study, micro-porous poly(methyl methacrylate)-grafted polyethylene separators (PE-g-PMMA) were prepared by a radiation-induced graft polymerization of methyl methacrylate onto a conventional PE separator followed by a phase inversion. After the phase inversion, the micro-pores were generated in the grafted PMMA layer. The prepared micro-porous PE-g-PMMA separators showed an improved electrolyte uptake and ionic conductivity due to their improved affinity with a liquid electrolyte and the presence of pores in the grafted PMMA layer. The PE-g-PMMA separators exhibited a lower thermal shrinkage compared to the original PE separator. The PE-g-PMMA separators showed a better oxidation stability up to 5.0 V when compared to the original PE separator (4.5 V).