Structural changes in helium implanted Zr0.8Y0.2O1.9 single crystals characterized by atomic force microscopy and EXAFS spectroscopy

The present work is devoted to investigate the local atomic environment (of Zr, Y and O) as well as surface modifications associated with excess helium in the cubic phase of (1 0 0)-oriented Zr0.8Y0.2O1.9 single crystal substrates. Commercially available oxide crystals have been implanted at various fluences in the range 0.15–2.0 × 1016 He-atoms/cm2 using a 2.74 MeV He+ ion beam passing through a 8.0 μm Al foil. The microstructure and surface morphology of the irradiated surface are examined using atomic force microscopy (AFM). The local atomic environments of Zr, Y and O in the implanted layer are studied using synchrotron radiation and by extended X-ray absorption fine structure (EXAFS) measured at glancing angles to probe the implanted layer. From AFM studies it was observed that the surface roughness increases as fluence increases and above a critical fluence stage, small blister-like structures originating from helium bubbles are scattered on the irradiated surface. The radial distribution functions (RDFs), derived from EXAFS data at the Zr K-edge, have been found to evolve continuously as a function of ion fluence describing the atomic scale structural modifications in YSZ by helium implantation. From the pristine data, long range order (beyond the first- and second-shell) is apparent in the RDF spectrum. It shows several nearest neighbour peaks at about 2.1, 3.6, 4.3 and 5.4 Å. In the implanted specimens, all these peaks are greatly reduced in magnitude and their average positions are changed, typical of damaged material. A simple model taking into account only the existence of lattice vacancies has been used for the interpretation of measured EXAFS spectra.