Initial stage of etching through pores in PET films irradiated by Ar ions

Changes in the diameters and depths of pores were studied in the process of etching polyethyleneterephthalate (PET) films irradiated by Ar ions having an energy of 1 MeV/n. Information about the pore diameters and lengths was obtained with JSM-840 and TEM-125 electron microscopes. The solutions of NaOH (0.5 mol/dm3 and 2 mol/dm3) were used as etchants. Etching was performed at 55 °C and 70 °C. Two methods of sensitization were used: the first one by UV illumination and treatment in dimethylformamide (DMF), the second method just by UV illumination. It was found that the diameters and the depths of pores are larger in films treated according to the first sensitization method. Etching duration (breakthrough time), which leads to through-going pores of the minimal radius, was established. After sensitization according to the first method the track etch rate grows quicker than the transverse etch rate. This gives a possibility to obtain through pores with diameters ranging from 50 nm to several micrometers.