Determining Pu isotopic composition and Pu content of PuBe sources by neutron coincidence technique

The paper describes a pure neutron method for determining both Pu content and Pu isotopic composition of PuBe neutron sources by neutron coincidence technique, without using gamma-spectrometry. The new procedure based on the R/T–T relationship is a developed version of the R/T-method based on R/T–MPu calibration curve described in [C.T. Nguyen, J. Bagi, L. Lakosi, A novel method of quantitative assay of PuBe neutron sources by neutron coincidence technique, Nucl. Instr. and Meth. B 246 (2006) 409], utilizing Pu isotopic correlations; here R, T, MPu are double count rate, single count rate and total Pu content, respectively. Accuracy of the method was found to be about 2–3% and 15% for 239Pu component and Pu content, respectively. Measurement time as a function of detector efficiency is treated in detail. It is shown that in a system of frame, a transuranium neutron source can be characterized by a pair of co-ordinates [R/T,  T].