Development of a novel reaction chamber for ion beam analysis of large samples

A novel vacuum chamber for ion beam analysis of large-size industrial samples - whose analysis are not feasible in conventional ion beam analysis reaction chambers - has been designed, fabricated and successfully tested. Using the newly developed chamber, both PIXE and RBS analyses could be carried out at the same time and on the same point of the samples. Ion beam analysis using this novel chamber lacks the disadvantages of external beam analysis and benefits the advantages of in-vacuum analysis. This has been achieved by designing a tiny open port in the wall of the reaction chamber to be sealed with a small flat area of sample body where its analysis is of interest. As a case study, two samples of gas turbine blades, a corroded one at highly corrosive environment and a refurbished one after application of certain coatings are analysed using the novel chamber. Experimental results confirm the performance and capability of the reaction chamber.