کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1689103 1518941 2016 20 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Mechanical stress and thermal aspects of the rotor assembly for turbomolecular pumps
ترجمه فارسی عنوان
استحکام مکانیکی و حرارتی مونتاژ روتور برای پمپ توربو مولکولی
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سطوح، پوشش‌ها و فیلم‌ها
چکیده انگلیسی
Due to the high speed and the high power density, the blade strength and the rotor overheating of a turbomolecular pump (TMP) are strongly related to the safety and the stability of the pump operation. For magnetically levitated TMPs, which can obtain an ultra-clean and ultra-high vacuum in comparison to traditional TMPs with oil-lubricated bearings, the rotor strength and overheating are limiting their ultimate pumping speed, since the rotor is only cooled by thermal radiation. This paper focuses on the stress analysis of the pump and the rotor thermal performance evaluation to prevent the permanent magnets (PMs) from irreversible demagnetization at high temperature and to ensure the rotor integrity throughout the whole speed range. The influence of the thickness of the sleeve around the PMs of the rotor shaft on electromagnetic losses and stress is analyzed. Finally, the electromagnetic and thermal tests are implemented on a prototype to verify the theoretical methods and the design concept. The measured maximum pumping speed of the prototype can reach 4180 L/s.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 129, July 2016, Pages 55-62
نویسندگان
, , , , ,