Behaviour of neutral hydrogen atom density in the presence of a sample holder in a plasma reactor

The behaviour of density of neutral hydrogen atoms in the presence of a sample holder in a MESOX reactor was studied. The MESOX reactor is used for studying interaction of hydrogen atoms with solid state surfaces at extreme conditions. Concentrated solar radiation with power of approximately 6 kW is collimated to a spot with the surface in the order of magnitude 1 cm2 thus allowing for independent sample heating above 2000 K. Hydrogen plasma is generated in a MW (microwave) discharge. The H-atom density is measured with a FOCP (Fibre Optics Catalytic Probe). The H-atom density in the empty reactor depends slightly on the pressure and MW power and is about 5 × 1021 m−3 at a power of 1000 W. The sample holder made from quartz glass was mounted in the centre of the reactor and the H-atom density was measured versus time. The H-atom density in the loaded reactor was decreasing continuously. After a time period in the order of 2 min, the H-atom density was reduced by approximately a factor of 3 in regards to the original value. The results were explained by taking into account a temperature dependence of the recombination coefficient for heterogeneous recombination of H atoms on the quartz surface.