Gas-sensing properties of nanostructured SnO2-based sensor synthesized with different methods

Herein we report the preparation of SnO2 nanomatierials by chemical precipitation, sol–gel and dissolution-pyrolysis. Furthermore, we studied their sensing properties. The composition, crystal structure and ceramic microstructure of the powders obtained are characterized by X-ray diffractometer (XRD) and scanning electron microscopy (SEM). The results show SnO2 fabricated through the three methods has rutile structure and the sizes of spherical particles are below 30 nm. From the result, we can also know that the thick films deposited onto alumina substrates show different morphology, and which are fabricated by dissolution-pyrolysis has fibrous structure. We investigate the sensitivities, response and recovery times of the three sensors. The results of gas sensing measurement show that SnO2-based sensor prepared by dissolution-pyrolysis method has high sensitivity, quick response and recovery behavior to the gases we studied. It also has wider range of working temperature that is from 25 to 400 °C compared with SnO2-based sensor fabricated by the other two methods.