Conceptual design of the vacuum system of the Spanish synchrotron light source (ALBA) storage ring

ALBA will be a third generation synchrotron light facility to be built near Barcelona (Spain). The design phase of ALBA is almost completed and the first components are ready to be ordered. Commissioning of the storage ring is foreseen to start at the end of 2008. The circumference of the storage ring of ALBA is 268.8 m and it will be divided into 16 vacuum sections by ultra high vacuum (UHV) gate valves. The vacuum chamber will be made of stainless steel with vertical aperture of 28 mm and 72 mm width. The vacuum chamber will be connected to an antechamber with a slot of 10 mm height. The antechamber will have the crotch absorbers which will absorb the unwanted synchrotron radiation. The pumping will be by sputter ion pumps (SIP), NEG pumps and titanium sublimation pumps (TSP), with an overall pumping speed from SIP of 57,400 l/s. This will maintain an average dynamic pressure of around 1 × 10−9 mbar to achieve a beam lifetime >15 h at the designed current.