Effects of magnetic field and rotary tool on EDM performance

In this work, the effects of tool rotation and various intensities of external magnetic field on electrical discharge machining (EDM) performance have been studied. Experimental trials divided into three regimes of low energy regime, middle energy regime and high energy regime. The influences of process parameters were investigated on main outputs of material removal rate (MRR) and surface roughness (SR). In order to correlate the input parameters and output values two mathematical models were developed to predict the MRR and SR according to variations of discharge energy, magnetic field intensity and tool rotational speed. Results indicated that the applying a rotational magnetic field around the machining gap improves the MRR and SR. Combination of rotational magnetic field and rotary electrode increases the machining performance, in comparison of previous conditions. This is due to better flushing debris from machining gap. This work introduces a new method for improving the machining performance, in cost and time points of view.

► Effects of magnetic field and tool rotation on EDM performance have been studied.
► Experiments divided in three regimes of low, middle and high energy regime.
► Outputs are material removal rate and surface roughness.
► Two mathematical models have been developed to predict the outputs.
► Material removal rate and surface quality improves with rotary magnetic field.