کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1698445 | 1519306 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
An Analysis of Cutting Parameters, Coated Materials and Nose Radii on Residual Stresses When Turning Inconel 718
ترجمه فارسی عنوان
تجزیه و تحلیل پارامترهای برش، مواد روکش دار و شعاع بینی در تنشهای پسماند در هنگام تبدیل اینکونل 718 ☆
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تنش پسماند؛ Inconel 718؛ پایان ماشینکاری؛ شعاع بینی؛ مواد پوشش داده شده
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
As a critical characteristic parameter of surface integrity, residual stresses on the machined surface and the subsurface have a huge influence on the service quality of a component, such as fatigue life. In this paper, a comprehensive study about the effects of coated materials, nose radii and cutting parameters on finish turning processes is presented. The results show that turning by PVD coated tool with smaller nose radius can produce higher compressive residual stresses or lower tensile residual stresses which can extend the fatigue life of parts. A finite element model is established to explain the difference in residual stresses, it shows that the thermal loads play a dominant role in the generation of residual stresses.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 46, 2016, Pages 368–371
Journal: Procedia CIRP - Volume 46, 2016, Pages 368–371
نویسندگان
Zhiyang Huang, Shaojie He, Zhuang Kejia, Xiaoming Zhang, Han Ding,