کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1698469 | 1519307 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hole Surface Topography and Tool Wear in CFRP Drilling
ترجمه فارسی عنوان
توپوگرافی سطح سوراخ و ابزار پوشیدن در حفاری CFRP ☆
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
حفاری؛ کامپوزیت یکپارچگی سطح؛ سایش ابزار
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
This paper deals with the hole surface quality when CFRP drilling. Mechanical instrumented operations have enabled to follow precisely the damage on the tool margins and the main cutting edges. The amount of uncut fibers according to the drill wear was evaluated with a roundness/cylindricity device versus the fiber's orientation and the tool damage. Thus, according to the hole's diameter tolerance, a wear criterion was defined to limit the number of holes achievable. This method has been carried out on unidirectional (UD) CFRP and then transposed on multidirectional (MD) CFRP. A model developed under Matlab was applied to predict the global topography of the hole surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 45, 2016, Pages 35–38
Journal: Procedia CIRP - Volume 45, 2016, Pages 35–38
نویسندگان
Gérard Poulachon, José Outeiro, Christophe Ramirez, Victorien André, Guillaume Abrivard,