کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1701486 | 1519351 | 2012 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Using NC-path Deformation for Compensating Tool Deflections in Micromilling of Hardened Steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
During the micromachining of hardened materials, the low stiffness of the milling tool results in an increased tool deflection which has a great influence on the shape and dimensional accuracy of the machined components. In order to compensate these deflections, an optimization method is presented in this paper. Based on measured form errors of the machined workpieces, the NC programs are optimized iteratively to reduce the shape deviations. To verify this method, experimental investigations were carried out by milling pockets in hardened steel. The results show a significant reduction of the tool deflection after the optimization.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 1, 2012, Pages 132-137
Journal: Procedia CIRP - Volume 1, 2012, Pages 132-137
نویسندگان
D. Biermann, E. Krebs, A. Sacharow, P. Kersting,