Numerical study on the heat transfer characteristics of LIVE-L4 melt pool with a partial solidification process

• Developing a numerical model to predict heat transfer of melt pool.
• Solidification model was developed in the numerical model.
• Mushy zone model was developed in the numerical code.

Using the source-based SIMPLE algorithm based on a fixed grid method, a two-dimensional numerical model for a convection-diffusion controlled mushy region phase-change problem was developed to investigate the heat transfer characteristics of LIVE L4 melt pool subjected to a partial solidification process in a Pressurized Water Reactor (PWR) lower plenum during a hypothetical severe accident. For the binary non-eutectic mixtures of L4 melt, a linear liquid fraction temperature relationship was implemented on the calculations of the velocity and enthalpy in the mushy zone. The effect of fluid flow in the melt pool was analyzed, and numerical results for the cases with and without phase change model were calculated to investigate the effects of solidification on the heat transfer characteristics of L4 melt pool. Numerical results indicated that the phase-change model could well predict the main parameters of melt pool, e.g. the melt pool temperatures, heat flux through the melt pool, and the crust thickness. Results also indicated that the predicted Nu number without solidification was overestimated by about 12%, compared with that with solidification.