کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1741660 | 1521787 | 2008 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Power density effect on feasibility of water cooled thorium breeder reactor Power density effect on feasibility of water cooled thorium breeder reactor](/preview/png/1741660.png)
Breeding is made possible by the high value of neutron regeneration ratio η for 233U in thermal energy region. The reactor is fueled by 233U–Th oxide and it has used the light water as moderator. Some characteristics such as spectrum, η value, criticality, breeding performance and number density are evaluated. Several power densities are evaluated in order to analyze its effect to the breeding performance. The η value of fissile 233U obtains higher value than 2 which may satisfy the breeding capability especially for thermal reactor for all investigated MFR. The increasing enrichment and decreasing conversion ratio are more significant for MFR < 0.3. The required enrichment and conversion ratio do not change significantly caused by power density change for very tight lattice cell (MFR < 0.3), however, its strongly depends on the power density change for higher MFR (MFR ≥ 0.3). Breeding condition of all investigated power densities can be achieved for burnup ≥ 30 GW d/t at MFR = 0.3 and it requires about 3.5% of required 233U enrichment. Number density of 233Pa decreases significantly with decreasing power density which leads the reactor has better breeding performance because lower capture rate of 233Pa.
Journal: Progress in Nuclear Energy - Volume 50, Issues 2–6, March–August 2008, Pages 308–313