کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1788591 | 1023475 | 2010 | 5 صفحه PDF | دانلود رایگان |
In order to improve the corrosion resistance of ceramic coatings formed on Mg–5mass%Li substrate by micro-arc oxidation (MAO) method, two kinds of additives (Na2B4O7 and EDTA) were doped in Na2SiO3–Na3PO4 solution system. The surface and cross-section morphology feature, phase composition and elemental composition were examined by SEM, XRD and EDX, respectively. Corrosion resistance of ceramic coating was tested by electrochemical methods. It was revealed that all coatings were composed of MgO and Mg2SiO4, and had porous surface structure. Doping of additives had little effect on the elemental composition, while it influenced the morphological feature of the coating. The results of electrochemical tests showed that the coatings prepared in the solutions with additive had good corrosion resistance. The addition of EDTA to the solution made coatings thinner and more uniform which resulted in better general corrosion resistance. The addition of Na2B4O7 to the solution made coatings much thicker and compacter, which improved the pitting corrosion resistance.
Journal: Current Applied Physics - Volume 10, Issue 3, May 2010, Pages 719–723