کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1789179 1023495 2006 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fabrication of charged particles for electrophoretic display
موضوعات مرتبط
مهندسی و علوم پایه فیزیک و نجوم فیزیک ماده چگال
پیش نمایش صفحه اول مقاله
Fabrication of charged particles for electrophoretic display
چکیده انگلیسی
Preparation conditions of nano-size cationically charged particles (TiO2) were studied for application to electrophoretic display. It was found that highly charged TiO2 particles could be prepared by milling 1.0 g of TiO2 particles, 0.5 g of silane additive as a charge controlling agent and 0.5 g of dispersant in 100 mL of cyclohexanone as a suspension fluid for 8-10 h using pot mill, followed by treatment with 0.4 g of acetic acid. The zeta potential and mobility of white (TiO2) charged particles were measured to be 63.76 mV and 3.11 × 10−5 cm2/V s, respectively. The e-paper display panel fabricated with charged TiO2 particles exhibited low threshold voltage (10 V) and 5.32/1 contrast ratio at 30 V.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Current Applied Physics - Volume 6, Issue 4, July 2006, Pages 644-648
نویسندگان
, , , , , ,