Utilization of wavelength-shifting fibers coupled to ZnS(Ag) and plastic scintillator for simultaneous detection of alpha/beta particles

Low level radioactive surface contamination measurements require lightweight, large area and high efficiency detector. In most existing scintillation detectors there is a tradeoff between effective area and scintillation light collection. By using wavelength shifting (WLS) fibers the scintillation light may be collected efficiently also in a large area detector. In this study, WLS fibers were coupled to a beta sensitive plastic scintillator layer and to a alpha sensitive silver-activated zinc sulfide ZnS(Ag) layer for detecting both alpha and beta particles. The WLS fibers collect the scintillation light from the whole detector and transfer it to a single PMT. This first prototype unique configuration enables monitoring radioactive contaminated surfaces by both sides of the detector and provides high gamma rejection.In this paper, the detector structure, as well as the detector’s measured linear response, will be described. The measured detection efficiency of 238Pu alpha particles (5.5 MeV) is ~63%. The measured detection efficiency for beta particles is ~89% for 90Sr–90Y (average energy of 195.8 keV, 934.8 keV), ~50% for 36Cl (average energy of 251.3 keV), and 35% for 137Cs (average energy of 156.8 keV).