Development of edgeless n-on-p planar pixel sensors for future ATLAS upgrades

The development of n-on-p “edgeless” planar pixel sensors being fabricated at FBK (Trento, Italy), aimed at the upgrade of the ATLAS Inner Detector for the High Luminosity phase of the Large Hadron Collider (HL-LHC), is reported. A characterizing feature of the devices is the reduced dead area at the edge, achieved by adopting the “active edge” technology, based on a deep etched trench, suitably doped to make an ohmic contact to the substrate. The project is presented, along with the active edge process, the sensor design for this first n-on-p production and a selection of simulation results, including the expected charge collection efficiency after radiation fluence of 1×1015neq/cm2 comparable to those expected at HL-LHC (about ten years of running, with an integrated luminosity of 3000 fb−1) for the outer pixel layers. We show that, after irradiation and at a bias voltage of 500 V, more than 50% of the signal should be collected in the edge region; this confirms the validity of the active edge approach.

► We conceive n-on-p edgeless planar silicon sensors.
► These sensors are aimed at the Phase-II of the ATLAS experiment.
► Simulations show sensors can be operated well in overdepletion.
► Simulations show the sensor capability to collect charge at the periphery.
► Simulations prove the above statements to be true even after irradiation.