Experimental study of the response of CZT and CdTe detectors of various thicknesses in strong magnetic field

In this paper, we used a combined experimental and Monte Carlo simulation approach to investigate the detailed charge collection process within thick CdTe/CZT detectors operated inside a strong magnetic field. As one of the key objectives, we quantitatively assessed the effect of the Lorenz force on the migration of charge carriers inside the detector bulk. This information would allow an accurate modeling of the detector's response to gamma ray interactions and therefore help to compensate for the event-positioning error induced by the strong magnetic field. In this study, a pixilated ERPC detector with 350 μm square pixels was set on a non-magnetic gantry and operated inside a 3 T Siemens MRI scanner. Multiple studies, with similar geometries, were performed using the same detector setup with and without the presence of the magnetic field to investigate the effect on the charge collection behavior from the strong magnetic field. The experimental results were used to validate the Monte Carlo simulation package that models both photon transportation and charge collection process inside the detector.