Neutron detection by measuring capture gammas in a calorimetric approach

The neutron capture detector (NCD) is introduced as a novel detection scheme for thermal and epithermal neutrons that could provide large-area neutron counters by using common detector materials and proven technologies. The NCD is based on the fact that neutron captures are usually followed by prompt gamma cascades, where the sum energy of the gammas equals to the total excitation energy of typically 6–9 MeV. This large sum energy is measured in a calorimetric approach and taken as the signature of a neutron capture event. An NCD consists of a neutron converter, comprising of constituents with large elemental neutron capture cross-section like cadmium or gadolinium, which is embedded in common scintillator material. The scintillator must be large and dense enough to absorb with reasonable probability a portion of the sum energy that exceeds the energy of gammas emitted by common (natural, medical, industrial) radiation sources. An energy window, advantageously complemented with a multiplicity filter, then discriminates neutron capture signals against background. The paper presents experimental results obtained at the cold-neutron beam of the BER II research reactor, Helmholtz-Zentrum Berlin, and at other neutron sources with a prototype NCD, consisting of four BGO crystals with embedded cadmium sheets, and with a benchmark configuration consisting of two separate NaI(Tl) detectors. The detector responses are in excellent agreement with predictions of a simulation model developed for optimizing NCD configurations. NCDs could be deployed as neutron detectors in radiation portal monitors (RPMs). Advanced modular scintillation detector systems could even combine neutron and gamma sensitivity with excellent background suppression at minimum overall expense.